ROYCE SSB 632 MIC. INFO
-
JOHNNY BE GOOD
- Dead Key
- Posts: 28
- Joined: Friday 26th Jan 2007, 0:31
- Location: PA.
ROYCE SSB 632 MIC. INFO
lOOKING FOR ANY INFO [schem. or manuals] FOR A ROYCE SSB 1-632. SEEMS TO RECEIVE OK WITH THE MIC DISCONECTED BUT CANT SEEM TO GET THE MIC. TO MOD. ON AM OR SSB IT SWITCHES TO TX AND LIGHTS BUT NO WATTAGE AT THE EXTENAL METER. ANY ONE KNOW THE MIC. PIN LAYOUT AND LOCATION OF 1-2-3-4 ON RADIO? ALSO THERE IS A SMALL TOGGLE SWITCH ON THE BACK WITH TWO BLUE WIRES GOING TO THE BOARD ANY IDEA WHAT THIS MAY BE FOR POSSIBLE ADD ON ? THANKS JOHN
Hi Johnny Be Good,
write me an PM with your email address. I have the schematic diagram
and also some alignment instructions too for the Royce 1-632 if you need.
Your small toggle switch on the back hears like a channel modification.
I have three different versions of that radio. Two of them are modified
on the PA/CB switch. One with 40 extra channels and one with FM.
The third version has an extra toggle switch on the
front like your radio to get (I think) 20 channels more.
Pin 1 = audio
Pin 2 = common
Pin 3 = tx
Pin 4 = not used
Sorry for the late answer!
write me an PM with your email address. I have the schematic diagram
and also some alignment instructions too for the Royce 1-632 if you need.
Your small toggle switch on the back hears like a channel modification.
I have three different versions of that radio. Two of them are modified
on the PA/CB switch. One with 40 extra channels and one with FM.
The third version has an extra toggle switch on the
front like your radio to get (I think) 20 channels more.
Pin 1 = audio
Pin 2 = common
Pin 3 = tx
Pin 4 = not used
Sorry for the late answer!
73! 13RA1MB / Germany / Berlin