Channel switch Cobra 148 glt-dx

[Chevin]

Can anyone help me with channel switch for cobra 148 gtl-dx

[zodiac]

Chevin,
What's the problem with the one you have or don't you have one at all, I've repaired and rebuilt many of them.
Dave.

[Chevin]

Dave,

I have been given a SS360 but the channel switch and display are missing, i have display from my junk box but i need a channel switch i have been told that the jackson is the same but i dont know if this is right?

[zodiac]

Chevin,
The codes shoud be the same for the Jacko as the Cobra 15 to 59, all Uniden channel switch codes are the same for SSB/AM/FM radios check it out to make sure.
Dave.

[zodiac]

Chevin,
The codes shoud be the same for the Jacko as the Cobra 15 to 59, all Uniden channel switch codes are the same for SSB/AM/FM radios check it out to make sure.
Dave.

[Chevin]

Thank your your help Dave try to phone you but you was on the phone. I am getting a new switch off Rick i think he is your mate, very helpful chap he sort out my problem with my rci 2950 he put me right on the part to change.

[zodiac]

Yes he is the man, I'd be lost without him.
Dave.

[Chevin]

Can any one help me with the hardware which go round the channel switch the bracket and 2 boards 1 for the display and the bottom 1 where the wires come from the pll to the switch, I also need a sig/rf meter.

[Chevin]

i sent my radio to Rick at euro radio co and he sort it out at a very good price. Thanks Rick once again.