Page 1 of 1

Robyn SB-540D‏ Microphone

Posted: Tuesday 3rd Apr 2012, 11:48
by cbdude1
Radio Make and Model: Robyn SB-540D‏
PLL Number: LC7120

I have acquired one of these beautiful old radios, but it does not have the original "Clar-O-Mic". I wish to wire up an ordinary off-the-shelf dynamic type microphone. I was wondering if anyone would have a microphone pin-out/wiring guide for this classic. I don't want to try and short out pins in the normal manner to find tx/rx/audio/ground, as at least one of the pins has voltage on them. I'm really itching to get her up and running again, any help would be greatly appreciated.

Re: Robyn SB-540D‏ Microphone

Posted: Wednesday 9th May 2012, 15:42
by hackindave
1 - Audio
2 - Shield
3 - Transmit
4 - Ground

Also add a .01 cap in series with the white lead