ERF 2030 Galaxy 99v
Posted: Saturday 8th Mar 2008, 18:32
PCB 3600 B
On the directions it says replace r-285 with 100 ohm resistor, but looking at the resistor chart for the PCB there is not a r-285. I was looking at the schematics, and it appears to be r-255. Am I right on this?
On the directions it says replace r-285 with 100 ohm resistor, but looking at the resistor chart for the PCB there is not a r-285. I was looking at the schematics, and it appears to be r-255. Am I right on this?